OneAccess ONE80 - Interface Description; G.SHDSL Interface (SHDSL)

ONE80 – Installation Manual
13
4 Interface Description
4.1 G.SHDSL Interface (SHDSL)
4.1.1 Safety Level of G.SHDSL (SHDSL) Interface
The G.SHDSL interface is TNV-1 (Telephone Network Voltage type 1).
It must be connected to a standard telephone line (external).
4.1.2 Characteristics
• ITU-T G.991.2 for the G.SHDSL (Annex A and B), 2 or 4 wires,
• Capacity:
• SHDSL 1 pair (2 wires): 192 kbps up to 2 320 kbps,
• SHDSL 2 pairs (4 wires): 384 kbps up to 4 640 kbps,
• SHDSL IMA G.SHDSL 4 pairs (8 wires): 768 kbps up to 9 280 kbps.
4.1.3 Connector Pinout
RJ45 connector:
Pin Signal Pin Signal
1 Line 2 5 Line 1
2 Line 2 6 Line 3
3 Line 3 7 Line 4
4 Line 1 8 Line 4
4.1.4 Cables
For the connection of the G.SHDSHL interface, use the shielded cable that comes
with the equipment.