EasyManua.ls Logo

oneConcept 10011554 - Safety Instructions

oneConcept 10011554
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Safety Instructions
Read through the Operators Manual carefully and understand the content before.
Use heavy gloves when inspecting or servicing the blades.
Wear eye protection and use gloves when installing the virtual wire and driving the wire
stakes/pegs. Firmly drive all pegs in order to keep the wire from becoming a tripping
hazard.
Do not use the charging station power supply with an extension cord.
Use only the original equipment power pack and power supply/charger with this mower.
Do not use the power supply/charger if the cord has become damaged.
Do not place metal objects in the area of the charging contacts on the charging station.
Do not place metal objects across the charging pins of the mower.
Do no spray water directly into the docking area of the charging station or onto the
operating panel of the charging station.
The mower has sharp rotating blades! Please care the mower when it is mowing, in case
of serious injury occur.
Keep the lawn mower in perfect operating conditions by performing the maintenance
procedures outlined by the manufacturer. Good maintenance guarantees better
performance and longer service life.
It is absolutely forbidden to use the robot in explosive and ammable environments.
The operator or user is responsible for accidents or hazards occurring to other people
or their property.
Never allow people unfamiliar with these instructions or children to use the appliance.
Local regulations may restrict the age of the operator.
The operator or user is responsible for accidents or hazards occurring to other people
or their property.
27