Installation
Adjusting height
The cutting height can be varied for 3cm
and 4cm. (Factory setting of blades is 3cm)
If the grass is long, it is appropriate to let the mower
start mowing at 4cm. Once the grass is shorter. you
can change it lower with 3cm.
1. Stop the mower and take o the key.
2. Turn over the mower to underside. It’s easy to nd
that there are two blades x on the blades holder.
Swing the 4 screws on blades holder. And take
blades out.
3. There are two kinds of blades. 3cm blades and 4cm
blades.
4. Choose your cutting height (3cm or 4cm), and then
x the two blades with screws.
5. Turn over the mower to upside. Cutting height
adjustment nished.
34
To Next Page
Loading...