1 Handle
2 Bumper: To change a new direction when it bumps obstacles.
3 Charging point
4 Emergency switch: Press it at any time, the mower turn o at once.
5 Charging terminal: Connect with charger for recharge directly.
6 Rain sensors: Mower goes back to charging station automatically when it rains.
7 Power light
8 Key switch: on/o
9 Omnidirectional wheel
10 Blade
11 Safety hence: To keep o foot and hands
12 Handle
13 Blade sheld
14 Tyre cover: Take it out and change the wheel.
15 Home button: Press this button, mower goes back to charging station
16 Virtual wire light Red: broken wire/idle; Colorless: good wire connecting
17 Charging light Red: charging; Green: fully charged or idle
18 Charge terminal
19 Virtual wire terminal Connect the virtual wire randomly, there is no positive and nega-
tive.
20 Charging sheet
21 Guide channel
22 Stakes hole
23 Charger: Used for directing the mower to charging station or for recharge directly.
24 Virtual wire/100m: Used to mark mowing area and create a virtual wall for the mower.
25 Remote control
26 Pegs / 100pcs: Used for x the virtual wire to the ground around the lawn perimeter
and around obstacles.
27 Stakes / 4pcs; Used for x the charging station to ground.
28 Blades Two 4cm blades pre-installed on the mower and two 3cm blades extra.
29 Key / 2pcs
30 Remote control battery
31 English user manual
32 Wire connectors
33 Inner hexagon spanner
30
To Next Page
Loading...