Sharp corners
Care must be taken not to create a corner sharper shorter than 90 degrees when setting
up virtual wire. A corner sharper less than 90 degrees can cause the mower to lose track
of virtual wire. We can make greater than 90 degrees corner like follow picture shows.
Joining the boundary wire
If the boundary wire is not long enough and needs
to be spliced: Use original solderless couper.
It is waterproof and gives a reliable electrical
connection.
To splice: Insert both cable ends in the coupler.
Now press down the button on top of the
connector fully. Use a pair of pliers or the like, as
the button on the connector is dicult to press
down by hand.
40
To Next Page
Loading...