OneProd FALCON - Page 4

4
Brand of ACOEM
SAFETY INSTRUCTIONS FOR FALCON AND ITS ACCESSORIES
The safety instructions described in this manual should be adhered to and the
instruments should always be used within the limits specified hereafter. Instrument and
operator safety is at risk when the instrument is used in conditions that are not intended
by ACOEM.
LIST OF SYMBOLS WARNING ON YOUR INSTRUMENT
Warning: Whenever this symbol is present on the device, it is essential to
refer to the safety instructions documentation and the user manual.
Symbol
Signification
Position
Laser radiation
Refer to section "Laser Class 3R"
Rear side
(bottom)
Laser radiation class 3R
Refer to section "Laser Class 3R"
Rear side
(bottom)
Avoid exposure to beam
Refer to section "Laser Class 3R"
Rear side
(bottom)
Light Hazard Group 2
Refer to section "High-power white LED
flash and stroboscope"
Rear side
(bottom)
Refer to the safety instructions
documentation and the user manual
before connecting
Rear side
(bottom)
Laser aperture
Refer to section "Laser Class 3R"
Rear side
(Top)
Battery replacement
Refer to section "Battery pack set-up"
Battery
compartment
CE certification data. Refer to the copy of
the CE APT2069 type certificate
Rear side
(center)
Do not dispose of this product as
unsorted household waste.
Refer to section "Dismantling/recycling"
Rear side
(center)
FCC and IC number. Refer to section
"Radio"
Rear side
(center)
External power connection: refer to
section "Main Power supply block"
Rear side
(bottom)