OneProd FALCON - General Rules

5
Brand of ACOEM
GENERAL RULES
 Comply with the safety instructions listed hereafter
 Comply with the operating instructions listed in the printed “Quick start guide”
and in the electronic user manual provided with FALCON.
VERIFICATION OF THE OVERALL CONDITION
 Upon each use, check the overall condition of FALCON and its accessories.
 Check that the housing is not cracked, broken or abnormally distorted.
 Check that the display window is not broken.
 Check the condition of the seals every time a hatch is opened and check
their proper positioning when closing the hatch(es).
 Check the condition of the cables: they should not show any cut, trace of
pinching, crushing or tearing at the connectors.
 In case of a defect, have the defective part(s) repaired or replaced.
 Dismantling the instrument for an internal operation is forbidden. The only
parts for which dismantling is allowed are the battery hatch, the battery and
the hatch providing access the connectors
 All the spare parts must be provided by the manufacturer.