Need help?Do you have a question about the OneProd FALCON and is the answer not in the manual?
General introduction to FALCON and essential safety instructions for use.
Lists instrument symbols/warnings and details device connectors.
Describes the FALCON's user interface, top connectors, and built-in sensors.
Covers WLS sensor battery, connection, and switching the wireless sensor on/off.
Explains methods for data exchange with a PC and status panel indicators.
Provides access to functions via shortcuts and details battery charging/replacement.
Details how to remotely control the FALCON instrument from a PC.
Configuration settings for the Collect module, including route protection.
Defines parameters for data acquisition, sensor types, and channel configurations.
Guides setting up wireless sensors, tachometers, and spectrum input.
Covers display options, camera access, touchscreen calibration, and system info.
Configures network settings, date/language, and manages instrument data.
Details calibration procedures and battery settings for instrument longevity.
Overview of the Collector module's purpose and operational flow.
Procedures for sending measurement routes from PC to the FALCON instrument.
Navigating measurement points, performing data acquisition, and viewing status.
How to browse route contents and understand channel assignments for measurements.
Methods for uploading measurements and managing off-route data.
Overview of the Balancing module, folder/list structure, and initial setup.
Instructions for connecting vibration sensors and tachometers for balancing.
Details on performing Free Run and Trial Run measurements for balancing.
Interpreting balancing results, defining trim steps, and achieving quality grades.
Process for creating and customizing detailed balancing reports.
Covers instrument reset, cleaning, calibration, and memory backup.
Instructions for updating the instrument and WLS sensor firmware.
Guide to installing the supplied screen protection frame.
Describes the file structure and organization of instrument data on a PC.
Technical specifications for spectrum measurements and long time-wave options.
Summary of new features introduced in different software versions.
General introduction to FALCON and essential safety instructions for use.
Lists instrument symbols/warnings and details device connectors.
Describes the FALCON's user interface, top connectors, and built-in sensors.
Covers WLS sensor battery, connection, and switching the wireless sensor on/off.
Explains methods for data exchange with a PC and status panel indicators.
Provides access to functions via shortcuts and details battery charging/replacement.
Details how to remotely control the FALCON instrument from a PC.
Configuration settings for the Collect module, including route protection.
Defines parameters for data acquisition, sensor types, and channel configurations.
Guides setting up wireless sensors, tachometers, and spectrum input.
Covers display options, camera access, touchscreen calibration, and system info.
Configures network settings, date/language, and manages instrument data.
Details calibration procedures and battery settings for instrument longevity.
Overview of the Collector module's purpose and operational flow.
Procedures for sending measurement routes from PC to the FALCON instrument.
Navigating measurement points, performing data acquisition, and viewing status.
How to browse route contents and understand channel assignments for measurements.
Methods for uploading measurements and managing off-route data.
Overview of the Balancing module, folder/list structure, and initial setup.
Instructions for connecting vibration sensors and tachometers for balancing.
Details on performing Free Run and Trial Run measurements for balancing.
Interpreting balancing results, defining trim steps, and achieving quality grades.
Process for creating and customizing detailed balancing reports.
Covers instrument reset, cleaning, calibration, and memory backup.
Instructions for updating the instrument and WLS sensor firmware.
Guide to installing the supplied screen protection frame.
Describes the file structure and organization of instrument data on a PC.
Technical specifications for spectrum measurements and long time-wave options.
Summary of new features introduced in different software versions.
General| Battery life | Up to 10 hours |
|---|---|
| Frequency range | 0.5 Hz to 20 kHz |
| Measurement Type | Vibration |
| Measurement Parameters | Velocity, acceleration, displacement, temperature |
| Operating Temperature | -10°C to +50°C |
| Type | Vibration Analyzer |
| Display | Color LCD touchscreen |
To Next Page
