EasyManua.ls Logo

OneProd MVX User Manual

OneProd MVX
43 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
MVX
User Manual
MVX
User Manual

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the OneProd MVX and is the answer not in the manual?

OneProd MVX Specifications

General IconGeneral
Number of Channels4
Simultaneous samplingYes
Frequency range0.1 Hz to 80 kHz
Data storageInternal memory, SD card
Measurement Range±10 V
Input typeIEPE, voltage
Resolution24-bit
ConnectivityWi-Fi
PowerInternal battery

Summary

1 Introduction

3 MVX Operating

3.3 Operating in "Monitoring" mode

Describes how MVX processes data to calculate indicators and compare them to alarm thresholds.

3.4 Operating in "Predictive Maintenance" mode

Explains how MVX performs scheduled acquisitions for predictive maintenance and stores data.

4 Set-up

4.1 Setup with OneProd CSM

Guides on using OneProd CSM for setting up monitoring tasks on MVX.

4.2 Set-up with ONEPROD XPR

Explains using ONEPROD XPR for predictive maintenance tasks and MVX setup.

6 Connecting MVX on an Ethernet network

6.1 Ethernet port selection

Explains the use and pin assignment of the two RJ45 Ethernet sockets (A & B) on the MVX.

6.2 IP addressing mode

Details the IP addressing modes for MVX, including default dynamic and fixed address configurations.

6.5 MVX Web interface

Explains how to access MVX information, configuration, and firmware updates via a web browser.

7 Using the MODBUS output interface

7.2 Communication principles

Explains MODBUS communication principles for MVX, including Serial MODBUS and MODBUS-TCP.

8 Maintenance

Related product manuals