2.4 Main evolutions of MVX version 4
In addition to the new functions described in the preVIOus chapter, Version #4.1 of
the MVX firmware includes the following evolutions:
2.4.1 New « Shock Finder
TM
» indicator (SFI)
This new indicator is able to detect abnormal shocks<;
It is especially suitable for low speed machineries, where standard indicators (i.e.
filtered RMS vlalues) are not always completely pertinent
Thus Shock Finder
TM
is suitable for windturbine rotor monitoring, steelmill or
papermill monitoring, etc.
It can be used for rolling element bearings as well as gearbox monitoring.
Shock Finder
TM
also incorporates a smooth function dedicated for decreasing false
alarm risk.
Please consult XPR300 V4.3 user manual (chapter 14.8) for more details about SFI
set up.
Shock Finder
TM
can be setup with ONEPROD NEST ANALYST (XPR)
Shock Finder
TM
can’t be setup with OneProd CSM
To Next Page
Loading...