2 Evolutions
2.1 Main evolutions of firmware version 5.4.0-7
WARNING : This firmware version is ONLY for MVX 1027000A, MVX1027000B,
MVX1029000 and MVX1031000.
Firmware update through the MVX Web interface (not CAST anymore).
Operating conditions management: only 1 operating condition can be valid at a
time. If more than 1 operating condition is valid, MVX takes the first valid
condition of the list (list from XPR operating condition pannel)
Improved definition of operating condition limits :
o Low limit included(≥), high limit exclude (>)
Operating conditions can be available by OPC or by Modbus, not both at the
same time.
Possibility to disable automatic reset in case of bad configuration in remote
locations
2.2 Main evolutions of MVX version 5.1
Modbus Digital Inputs: Refer XPR software user manual to see the
implementation of this feature. This mode cannot be used with CSM
The operating parameters are available through MVX Modbus output: cf. §
7.3.8
New management Ethernet ports: cf. § 6
2.3 Main evolutions of MVX version 5.0
2.3.1 Monitoring on 100% of the signal
This new functionality is available only on Premium MVX version
From V5.0.xx version MVX Premium is able to compute in real time a selection of
indicators. The aim of such a function consists in ensuring that 100% of the signal is
actually monitored.
To Next Page
Loading...