1 Introduction
Thank you for purchasing the ONEPROD MVX monitoring and predictive
maintenance system.
This performing system allows for the monitoring of industrial machines using 8, 16,
24 or 32 measurement channels, depending on the selected model.
ONEPROD MVX can also act as a synchronous multichannel acquisition system
when connected to a predictive maintenance platform based on the ONEPROD
NEST ANALYST (XPR) software package.
ONEPROD MVX can be connected to many transducers, even though its prime
objective remains vibration measurement and analysis.
In case of a problem, please contact OneProd Hotline:
oneprod.support@acoemgroup.com
1.1 Hazardous areas
WARNING
REFER TO INSTALLATION MANUAL BEFORE ANY INSTALLATION IN A HAZARDOUS
AREA.
SEE DOC3012 2015-12 G or later.
1.2 Installation
See the dedicated manual for MVX Installation:
DOC3012
To Next Page
Loading...
