Onespace 50-LD0101 User Manual

H x 4
STEP 20
STEP 19
ASSEMBLY INSTRUCTIONS
STEP 18
Insert shelf supports (H) into any of the four sets of holes,
according to desired height. Place middle shelf (8)
on supports.
Align inner and outer rollers to insert
drawer and keyboard tray.
Place plastic caps (22) over cams at the back of the
desk and cams in the hutch middle board (20).
15 of 16

Onespace 50-LD0101 Specifications

General

Brand	Onespace
Model	50-LD0101
Category	Indoor Furnishing
Language	English