OneTouch Ultra Plus Flex User Manual

22
1
Getting to know your system
3 Possible Range Indicator Displays
A Range Indicator Arrow will
appear just below your result
after each test depending upon
how you set your low and high
range limits in the meter.
Things you should know before
using the Range Indicator feature:
• The meter comes with pre-set
range limits. The pre-set low
range limit is 3.9mmol/L and
the pre-set high range limit is
10.0mmol/L. You can change
these limits as needed to meet
your needs. See page79 for
details on the pre-set range
limits and on editing your
range limits.
• If you decide to change
your range limits, the Range
Indicator Arrows stored with
previous results in meter
memory will not change.
However, any new tests will
display Range Indicator Arrows
which reflect your changes.
Example
Below Range Result
Example
In Range Result
Example
Above Range Result

OneTouch Ultra Plus Flex Specifications

General

Display Type	LCD
Connectivity	Bluetooth
Test Time	5 seconds
Sample Size	0.4 μL
Measurement Range	20 to 600 mg/dL
Memory	500 tests
Automatic Shutoff	Yes (after 2 minutes of inactivity)
Operating Conditions	10% to 90% RH
Storage Conditions	Humidity: 10 to 90% RH