OneTouch Ultra Plus Flex User Manual

25
2
Setting up your system
First time setup
To turn your meter on, press and hold
until the start-
up screen appears. Once the device is on, release .
The meter will now automatically prompt you to set the
time and date. The SET icon will appear on the screen to
indicate that the meter has entered setup mode.
Setting the time
Hour will flash
• If the hour displayed
is correct, press
to
confirm.
• If the hour displayed is not
correct, press
or to
change the hour and press
to confirm.
Minutes will flash
• If the minutes displayed
is correct, press
to
confirm.
• If the minutes displayed is
not correct, press
or
to change the minutes
and press to confirm.

OneTouch Ultra Plus Flex Specifications

General

Display Type	LCD
Connectivity	Bluetooth
Test Time	5 seconds
Sample Size	0.4 μL
Measurement Range	20 to 600 mg/dL
Memory	500 tests
Automatic Shutoff	Yes (after 2 minutes of inactivity)
Operating Conditions	10% to 90% RH
Storage Conditions	Humidity: 10 to 90% RH