OneTouch Ultra Plus Flex User Manual

47
3
Taking a test
Preparing the meter
1. Insert a test strip to turn the meter on
Insert a test strip into the test strip port with the blue side
of the test strip and the two silver prongs facing you.
NOTE: No separate step to
code the meter is required.
The flashing blood drop
icon (
) appears on the
display. You can now apply
your blood sample to the
test strip.

OneTouch Ultra Plus Flex Specifications

General

Display Type	LCD
Connectivity	Bluetooth
Test Time	5 seconds
Sample Size	0.4 μL
Measurement Range	20 to 600 mg/dL
Memory	500 tests
Automatic Shutoff	Yes (after 2 minutes of inactivity)
Operating Conditions	10% to 90% RH
Storage Conditions	Humidity: 10 to 90% RH