OneTouch Ultra Plus Flex User Manual

73
4
Reviewing past results
Using the meter without syncing to an
app
The meter can be used without a compatible wireless
device or the app. You can still test your blood glucose
and review up to 500 results on the meter.
Sending your results to the app
If the BLUETOOTH
®
feature on the meter is turned on,
indicated by the BLUETOOTH
®
symbol ( ), the meter
will automatically send the latest result to any paired
compatible wireless device. The compatible wireless
device must have the app running and have already been
paired to the meter before sending a result.
NOTE: The compatible wireless device must have the app
open and have already been paired to the meter before
sending a result. See page30.
NOTE: If the BLUETOOTH
®
feature on the meter is turned
off, or the meter is out of range, the result is not sent
to the compatible wireless device. The result is saved in
the meter memory with the current date and time, and
will be sent to the app the next time you sync. The sent
results are also stored in the meter. To sync, the app must
be open and running on your compatible wireless device.

OneTouch Ultra Plus Flex Specifications

General

Display Type	LCD
Connectivity	Bluetooth
Test Time	5 seconds
Sample Size	0.4 μL
Measurement Range	20 to 600 mg/dL
Memory	500 tests
Automatic Shutoff	Yes (after 2 minutes of inactivity)
Operating Conditions	10% to 90% RH
Storage Conditions	Humidity: 10 to 90% RH