OneTouch VitA - Post-test procedures

16
After getting a result
Once you have your result, you may:
• Attach an after-meal ag to this result; see page 24,
or,
• Review your meter memory by pressing
OK
; see page 26,
or,
• Turn the meter o by removing the test strip.
Removing the used lancet
Remove the lancing device cap.
Place the lancet protective cover
on a hard surface and push the
lancet tip into the cover.
Remove the lancet and place it
in a container for sharp objects.
Replace the blue/black cap.
Disposing of the used lancet and test strip
Used test strips and lancets may be considered
biohazardous waste in your area. Make sure you
follow your local regulations for proper disposal.
Testing (ngertip)
Customer Care Freephone 0800 121 200 (UK) or 1800 535 676 (Ireland)