OneTouch VitA - Using the after-meal flag feature

25
Attaching after-meal ags
Using the after-meal ag feature
1. Adding an after-meal ag
To add an after-meal ag, the meal ag
feature must be turned on.
When a glucose test result is
displayed, the up arrow
at the
bottom right corner of the screen will
blink next to the words AFTER MEAL?.
Press
to add an after-meal ag to
this result.
2. Choosing not to add an
after-meal ag
If you do not want to add an after-
meal ag, press
OK
instead of
.
You will go to the MAIN MENU.
If you choose not to add an after-meal
ag when the meal ag feature is on,
AFTER MEAL? and a blinking up arrow
will appear at the bottom of
the screen.
3. Removing an after-meal ag
You can remove an after-meal ag
from any test result. Press
while
your after-meal ag is displayed, then
press
OK
. Your ag will be removed
and you will go to the MAIN MENU.
27/FEB/08 14:07
AFTER MEAL?
mmol/L
6.8
�
�
27/FEB/08 14:07
AFTER MEAL
mmol/L
6.8
�
27/FEB/08 14:07
AFTER MEAL?
mmol/L
6.8
�
�
Indicates an after-meal
ag has been added
Indicates no ag added
or ag removed
Customer Care Freephone 0800 121 200 (UK) or 1800 535 676 (Ireland)