RIDING YOUR ONEWHEEL PINTONEWHEEL PINT OWNER’S MANUAL 25
BASIC BALANCE
Remember, Onewheel Pint is self-balancing so there’s
no need to muscle your way onto the board. Instead,
use slow, small movements.
When Onewheel Pint is on the ground, you’ll notice
a lower side and a higher side. Always step onto the
lower side first. Then place your other foot onto the
rider-detection area. Keep your legs straight (like you
are standing on the ground) with a very slight bend
in your knees.
Stand up slowly and the Onewheel Pint will engage.
TIP: Have a friend’s shoulders handy to help you the
first few times you get on your Onewheel Pint. After
practicing a few times, we promise you’ll be a pro.
TIP: Look where you want to go (don’t look down).
TIP: Use light, constant pressure to control
your Onewheel.
TIP: Don’t bend your knees, stand tall on your
first rides.
To Next Page
Loading...