45
SAFETY CHECK
Doing regular safety checks will help prolong the life of
your Onewheel Pint. We recommend that you carefully
inspect your Onewheel Pint before every ride to make sure
that there are no loose, damaged or unusually worn parts.
All nuts and bolts should be tight. Most Onewheel Pint
components were designed so that they can be easily
replaced if there is a problem.
CONTACT ONEWHEEL CUSTOMER SERVICE IF YOU
HAVE QUESTIONS. EMAIL SUPPORT@ONEWHEEL.COM
03
MAINTAINING
YOUR PINT
WARNING: Before performing any minor work on
your Onewheel Pint, make sure the power switch is
in the “OFF” position.
WARNING: The footpads are an integral part
of the safety system for the Onewheel Pint. Never
ride with damaged footpad or grip tape, and never
attempt to replace grip tape. Replacement footpads
are available at www.onewheel.com.
CAUTION: Riding a damaged Pint will void
its warranty.
CAUTION: Never attempt to remove or replace grip
tape with aftermarket grip tape.
WARNING: Riding with a damaged footpad is
extremely dangerous. Replace immediately.
BUMPERS
Bumpers are designed as wear-and-tear components
and must be replaced as they wear. More details can be
found at onewheel.com/support
FOOTPADS
Inspect footpads for any cracks, punctures or tears in the
grip tape, particularly in the rider-detection area. If you
notice any damage, contact support@onewheel.com for
replacement parts.
To Next Page
Loading...