EasyManua.ls Logo

Onewheel+ pint - Onewheel Pint Specifications; Charger Specifications

Onewheel+ pint
39 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ONEWHEEL PINT OWNER’S MANUAL 67
Persons with heart conditions, pregnant women,
persons with head/back/neck ailments, persons
with mental or physical conditions that make them
susceptible to injury, and persons with impaired
capabilities should not operate.
Do not ride at night or during times of low visibility
(e.g., fog, rain, dusk, dawn).
Follow all manufacturer’s recommendations and
instructions, as well as comply with all laws and
ordinances.
Components shall be maintained and repaired in
accordance with manufacturer’s specifications,
only authorized replacement parts shall be used,
and installation shall be by dealers or other skilled
persons.
MORE WAYS TO RIDE SAFELY
ONEWHEEL PINT SPECIFICATIONS
PINT SPECIFICATIONS
MOTOR : 750W Hypercore® hub motor
BATTERY : Nickel Manganese Cobalt Oxide (NMC)
SENSORS : Solid State MEMS 6-DOF
TIRE : 10.5 × 4.5-6 Onewheel
MAX LEAN ANGLE : > 30 degrees
TOP SPEED : 16 MPH / 26 KPH
TYPICAL RANGE : 6-8 MI / 10-13 KM
DIMENSIONS : 8.75×10.5×27 (IN) / 222x266x689 (MM)
WEIGHT : 23 LB / 10.5 KG
RECHARGE TIME : 120 mins* (FY630130 charger)
INPUT : AC100-240V
50/60Hz 110VA
OUTPUT : +63VDC 1.3A
MODEL # : FY630130
PINT CHARGER SPECIFICATIONS
OPERATING
TEMPERATURE RANGE
: 0C to 50C
OPERATING HUMIDITY
RANGE
: 0 to 100% RH
(non-condensing)
*CHARGE TIME ESTIMATED STARTING FROM A 10%-90% CHARGE.