Why does my ONFORU Outdoor Light illuminate during the day?
If your ONFORU Outdoor Light sensor light illuminates during the day, it might be due to shadows around the sensor causing it to mistakenly think it's night. Make sure you do not cover the sensor head.
What to do if ONFORU Outdoor Light senses movement but doesn't light up?
If the LED on your ONFORU Outdoor Light senses movement but doesn't light up, first, check if the light is energized and powered on. Also, surrounding light sources might be interfering, causing the light to misjudge it as daytime. Try turning off nearby lights or re-directing the sensor head.
How to fix ONFORU Outdoor Light surrounded by unstable flashing light sources?
If your ONFORU Outdoor Light sensor is surrounded by unstable, flashing light sources shining onto the induction, avoid exposing it to such light sources. Also, follow the instructions in “LED DUSK TO DAWN WALL LIGHT – Matters Needing Attention” to readjust the light sensor.
Instructions to prevent electrical shock during installation.
Guidelines for using wire nuts and protecting insulation.
Critical warning about connecting to ungrounded electrical systems.
Step-by-step guide for electrical wiring connections.
Solutions for common malfunctions like light not lighting up or flashing.
General| Model | BDB55D-3 |
|---|---|
| Brand | ONFORU |
| Category | Lighting Equipment |
| Wattage | 55W |
| Voltage | 120V |
| Beam Angle | 120 degrees |
| Lifespan | 50, 000 hours |
| Material | Aluminum + PC |
| IP Rating | IP66 |
| CRI | 80 |
| Installation | Wall Mount |
| Certification | CE, RoHS |
To Next Page
