Why does my ONFORU BDD100G-3 LED sensor light stay on continuously?
The LED sensor light may remain on if there is continuous movement within its sensing range. Check the area for ongoing activity and retune or override the sensor head if necessary.
What to do if my ONFORU BDD100G-3 Lighting Equipment LED lights turn on unexpectedly?
Unexpected activation of your ONFORU lighting equipment can occur due to several reasons: wind blowing branches or bushes within the sensing range, sensing cars on the road, or sudden temperature changes from climate factors, fans, or exhaust from open windows. Adjust the scope to avoid these triggers or change irradiation area.
Why is my ONFORU Lighting Equipment LED sensor light flashing?
The LED sensor light might be flashing because it is surrounded by other unstable light sources shining onto the induction. Avoid exposing the sensor to such light sources.
How to fix ONFORU Lighting Equipment LED sensor light that illuminates during the day?
If your ONFORU lighting equipment's LED sensor light turns on during the day, it might be due to shadows around the sensor causing it to mistakenly think it's night. Ensure that you do not cover the sensor head and that the light is placed in a location where the light is bright enough during the day.
What to do if ONFORU BDD100G-3 Lighting Equipment LED senses movement but doesn't light up?
If your ONFORU lighting equipment LED senses movement but doesn't illuminate, consider these potential causes: * The light may not be energized, so check the power-on status. * Surrounding light sources might be interfering, making the light misjudge it as daytime. Try turning off nearby lights or directing the sensor head elsewhere. * If it's daytime, the brightness might be in night mode; try resetting it. * Internal wiring could be loose; rewire after a power failure.
Lists the different model numbers available for the PIR LED wall lights with motion sensor.
Identifies and labels key components of the light fixture, including cover, LED source, bracket, and sensor head.
Details all hardware and accessories provided with the product, including screws, plugs, gaskets, and wire nuts.
Presents detailed technical specifications and physical dimensions for each model, including power, flux, and coverage.
Explains how to adjust sensitivity (SENS), day/night detection, and time-delay settings.
Details the 180° detection range and recommended sensor orientation angles (0-45°).
Provides important notes on sensor tilting, temperature effects on detection, and continuous motion behavior.
Covers assembly checks, recommended installation height, and appearance variations.
Lists tools required for installation but not included with the product.
Highlights critical warnings and cautions for safe installation, including turning off power.
Details safety measures for wiring, wire nuts, grounding, and avoiding exposed wires.
Guides through mounting the bracket and connecting the house wires to the fixture wires.
Explains how to attach the fixture and ensure proper engagement of mounting plate parts.
Addresses common malfunctions such as lights not turning on, staying on, or flashing, with corresponding remedies.
General| Brand | ONFORU |
|---|---|
| Model | BDD100G-3 |
| Category | Lighting Equipment |
| Language | English |
To Next Page
