Need help?Do you have a question about the Onick LS320 and is the answer not in the manual?
General| Exit Pupil Diameter | 3.8mm |
|---|---|
| Ranging Accuracy | ±1m |
| Wavelength | 905nm |
| Dimensions | 104x72x41mm |
| Accuracy | ±1m |
| Resolution | 1m |
| Measuring Range | 5-320m |
| Laser Type | Class 1 |
| Battery | CR2-3V |
| Measurement Range | 5-320m |
| Operating Temperature | -10°C to 50°C |
| Power Supply | CR2-3V |
Details the physical components of the handheld laser speedometer, including eyepiece, speaker, display, and controls.
Describes the device's standby mode and the initial appearance of the display screen upon powering on.
Instructions for turning the display backlight on and off using the HUD button.
Explains how to navigate and select different measurement modes like Speed & Distance, Speed Only, and Distance Only.
Details how to switch between speed units (KM/H, M/H, M/S) and distance units (Meters, Yards).
Describes how to set a speed limit value for the device, ranging from 15KM/H to 250KM/H.
Instructions for setting the environment mode to Normal or Bad Weather conditions.
Guide on how to switch between speed-only, distance-only, and combined speed/distance measurement modes.
Explains the functions of each button on the operation panel, including MODE/REC, HUD/B/Light, VOL/V, and SPD/DIST/A.
Details the battery handle specifications, capacity, protection, and essential charging procedures.
Covers critical safety rules regarding battery handling, storage, and use to prevent damage or injury.
Advises against staring at the laser beam and targeting the product at the sun to protect eyes and the device.
Details operational temperature ranges and crucial handling advice for Li-ion batteries to prevent instability and damage.
To Next Page
