lnstructions
(Cont.)
Menu Settings for
Video
Mode
There are independent
settings
menus for
each mode.
.
When under the
selmted
mode,
press
the MENU button to
enter the
settings screen for
that mode.
Use the UP/DOWN
buttons to
cycle
through the
settings items
and
press
the OK button to confirm
a
selection.
.
ln
standby mode,
pres
the
POWER/MENU
button to open the
menu,
then
press
the
MODE
button to
switch to different
tabs of the menu.
.
Once the settings
are done,
press
the MENU
button to exit.
Video
Size
Select from: 1920
x 1080
(interpotated),/
i2BO
x
720
(defautt)
/ 640
x
480
pixe,s.
Moiion Detection
Select Jrom:
ON or OFE
When
ON is selected,
the
Car
Rsorder
will automatically
enter standby
mode when
the vehicle is
started.
When an
object moves within the
camera,s
range of detection,
vid@ rsording
will
start automatically.
When lhe object
stops moving, the camera
will
be reording
about 20 seconds then
stop and
save the file.
Loop
Time
Select the length
limit for
each rtrorded
video file:
l/2/S minutes. or
OFF.
lf
sei lo OFF, there will
be no limit
on rsording
time.
Video Sound
Select rrom:
ON or OFE
When
OFF
is
selected. sound
will not be recorded.
Date Stamp
You can choose whether
to
display the
date and time on the video
jmages.
Select fromt
OFF / Date
Only
/
Date
and Time.
When
'OFF'
is selected,
no time
will be displayed
on the video Iile.)
G-sensor
This will lock the
current video
when there is
a shock detected
(so
that
the
video can not
be deleted,
and
you
need to unlock the video
before deleting).
Sensitivity can be set
to: High/Middle/Low,
or Off.
ATTTXSAESsUPPONT
12
a@
lmses
q
wwwtempo.org
Modolr ACSB'@13 Prducl
Cdc: 6&@/ml3
lnstructions
(Cont,)
More Settings
ln standby mode,
press
the
POWEB/lVlENU
button to show
the menu Press
the MODE button
to move to
the seltings lab for further
settings options.
Park Mode: When
the car
is
parked
and the camera
has been set
to this
mode
(the
camera
is then
turned off),
ii there is a shock or
interference
to the
car, the camera
will turn on and
record video automatically
(video
is
locked).
Sensitivity can
be set tor High/[.4iddle/Low.
Power Frequency:
The trequency
of the electricity used
in the
region.
Power Save: Set a
duration after
which the camera
will turn off automatically
when there
is no operation.
Panel Protect:
Turns ofl the
LCD screen automatlcally
after the set
time.
Date/Time: Set up
the current
date and time
(use
the
Up/Down
button
to
change
the value, and use
the
MODE button to move to the
next digit).
Language:
Select
from 13 languages
forlhe system.
Formati Format
the SD card
(this
means
all files on the SD card
will be
deleted, so make sure
you
backup
your
files berore
formating).
Reset All: Fleset to
factory settings.
About: Show
product
inlormalion.
Support Show
support inlormation.
Vereion: Show
system software
version.
Menu Settings
for Picture
Mode
Resolution: Select
the
photo
resolution.
Quality:
Select
the
photo quality
level.
Self Timer: Set lhe
timer to take
a
photo.
Date Stamp: Show
the
Date / Date and
Time on the
photo.
I[TER5AtrS5UPP0RI
g
aw.bmp.o,s
E @
1m6ils
ilodclAcss4lsPrdudcodeffiM0ls
13
To Next Page
Loading...