1. Short press to skip to the next song.
2. Hold to start forwarding currently playing song.
Next/Forward
7
Volume Control
2. Insert the card into the card slot in the indicated direction and press it gently until it locks
inside. Press again to remove the card.
Micro SD
Micro SD Card Port
1. The port is only for the standard card and supports a capacity up to 2TB.Micro SD
Headphone Output Interface
Turn the wheel to decrease or increase volume.
The device uses special combined 3.5mm output. Normal single-ended headphones can be used
directly. For Balanced headphones, a special 3.5mm to 4.4mm adapter is needed.
Charging
Supports QC3.0 fast charge and standard USB charging. When the USB cable is connected, display
shows battery charging icon and power level. The status indicator light will pulse red while
charging.(only if screen is off)
Micro SD Card Update
1. Please download firmware update from ONIX official website. Copy latest firmware file into root
directory of Micro SD card.
2. Go to "Technical Support - Firmware Update - Local Update", choose the path to firmware file and
click update.
Firmware Update
1. When updating the firmware, please make sure that XM10 is fully charged.
2. Do not do operate the player during the update process.
Over-the-Air Update
While connected to local Wi-Fi network, device will automatically check for new firmware update. To
check for new firmware manually, go to menu "Technical Support - Firmware Update - Online
Update" and click on "Check for Update".
XM10 Portable Music Player
To Next Page
Loading...