What to do if my Onix RA-125 Amplifier has no sound?
If your Onix Amplifier isn't producing any sound, the audio cables might not be properly connected, or the volume could be set to the minimum. Try reconnecting the audio cables securely and adjusting the volume to your preferred level.
Why my Onix RA-125 has no power?
If your Onix Amplifier isn't turning on, it might be due to a poor connection at the power socket or a problem with the power supply. Check the power source and ensure the socket connection is secure.
How to fix Onix RA-125 Amplifier remote control not working?
If the remote control for your Onix Amplifier isn't working, the batteries might be misplaced or dead. Try reinstalling or replacing the batteries.
Essential safety precautions, operating conditions, and handling advice for the amplifier.
Identifies and describes the controls and indicators on the front of the amplifier.
Details all input and output ports located on the rear of the amplifier.
Explains the buttons and their functions on the remote control.
Step-by-step guide for installing batteries into the remote control.
Guides on switching audio inputs and adjusting volume levels.
Explains output protection, USB audio, and Bluetooth wireless streaming.
Addresses common operational faults with their causes and solutions.
Lists key technical specifications of the ONIX RA-125 amplifier.
Lists the items that come with the amplifier package.
General| Input Sensitivity | 250mV (Line) |
|---|---|
| Frequency Response | 10Hz - 50kHz (±0.5dB) |
| Power Output | 125 Watts per channel into 8 Ohms |
| THD | <0.05% |
| Signal to Noise Ratio | >100dB |
| Total Harmonic Distortion | <0.05% |
| Signal-to-Noise Ratio | >100dB (Line, A-weighted) |
To Next Page
