1-7-2 E5WF0FW
How to Verify the Firmware Version
1. Turn the power on.
2. Remove the disc on the tray and close the tray.
3. Press [ ] (skip up), [1], [2], and [3] buttons on
the remote control unit in that order.
Fig. f appears on the screen. All VFD lights.
Fig. f
4. To exit this mode, press [ ] button.
"
*
" differ depending on the models.
F/W Name
Version
Region
Pickup
ESN
DRM
Version Display
: *******
: *.**.**
: *-*
: **
: ********************************
: OK
Default Setting : --
Default Setting : STOP End : STANDBY-ON
VFD/LED Check : OK
To Next Page
Loading...
