To Next PageTo Next PageWhy can't my Onkyo BD-SP809 Blu-ray Player read Blu-ray Disc / DVD/ CD?
If the unit cannot read the disc, it could be due to condensation. Let it sit for 1 or 2 hours. Check if the disc is compatible with this unit. Wipe any dirt off the disc, or replace the disc.
What to do if my Onkyo BD-SP809 cannot be turned on?
First, make sure the AC cord is firmly plugged into the power outlet. Try unplugging the AC cord, waiting 5-10 seconds, and then plugging it back in. Also, check if “Auto Power Off” is set to “On”; if so, the power turns off after 30 minutes of inactivity. If 'Auto Power Off' is on, the unit turns off automatically after 30 minutes of no playback.
What to do if my Onkyo BD-SP809 has no power?
First, verify that the AC cord is properly connected. If it is, unplug the AC cord, wait 5 to 10 seconds, and then plug it back in.
Why is there no sound or picture on my Onkyo Blu-ray Player?
There could be several reasons for this. First, ensure the connected TV is turned on and that all connections are securely and correctly made. If you're using a video cable, the copyright protection system might be interfering; try connecting the unit directly to the TV with an HDMI cable. Also, check that the connected TV or device supports HDCP, as the unit won't output video without it. Confirm that the output format of the Blu-ray player (HDMI FORMAT) matches the supported input format of the connected device. As a last resort, press and hold [B (play)] on the front panel for 5 seconds to reset the settings to default.
What to do if my Onkyo BD-SP809 Blu-ray Player remote control is not working?
If the remote control isn't working, make sure the unit is connected to the power outlet and that you are pointing the remote control directly at the unit. Also, check that the batteries are inserted with the correct polarity or try inserting new batteries.
What to do if my Onkyo BD-SP809 Blu-ray Player does not return to start-up screen when disc is removed?
Reset this unit by turning it off for 30 seconds, then on again.
Why can't my Onkyo Blu-ray Player play back MP3 files from a disc?
Make sure that the disc was recorded in the UDF, ISO9660, or JOLIET format. Also, ensure that the bit rate of the MP3 files is between 112 and 320 kbps and that the sample rate is 32 kHz, 44.1 kHz, or 48 kHz.
Why can't my Onkyo BD-SP809 Blu-ray Player play back WMA files from a disc?
Make sure that the sample rate of the WMA files is 44.1 kHz or 48 kHz.
How to fix completely distorted or black and white picture with Blu-ray Disc / DVD on Onkyo BD-SP809 Blu-ray Player?
Make sure the disc is Region compatible or otherwise compatible with this unit.
What to do if my Onkyo BD-SP809 Blu-ray Player cannot play back a disc?
If the unit cannot play back a disc, first ensure that the product supports the disc type. Check the region code of the disc; this unit supports Blu-ray Disc™ region “B” and DVD regions “ALL” or “2”. Finally, try cleaning the disc.
General| 3D | Yes |
|---|---|
| Depth | 313 mm |
| Wi-Fi | No |
| Width | 435 mm |
| Height | 104 mm |
| Weight | 4700 g |
| Display | - |
| Device type | Blu-Ray player |
| Package depth | 411 mm |
| Package width | 551 mm |
| Product color | Silver |
| Audio decoders | Dolby Digital Plus, Dolby TrueHD, DTS-HD |
| Package height | 217 mm |
| Package weight | 6100 g |
| Cables included | AV |
| AC input voltage | 110 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Dimensions (WxDxH) | - mm |
| Disc types supported | BD-R, BD-RE, BD-ROM, CD, CD-R, CD-RW, DVD, DVD+R, DVD+R DL, DVD+RW, DVD-R, DVD-R DL, DVD-RW |
| Dynamic range (1kHz) | 98 dB |
| USB 2.0 ports quantity | 1 |
| Audio formats supported | MP3, WMA |
| Image formats supported | JPG |
| Video formats supported | AVCHD, DIVX, MKV, MPEG1, MPEG2 |
| Power consumption (standby) | 0.1 W |
| Power consumption (typical) | 23 W |
| Signal-to-Noise Ratio (SNR) | 100 dB |
| Audio output channels | 5.1 channels |
| Total Harmonic Distortion (THD) | 0.005 % |
Details on signal system, audio performance, and terminal connections.
General safety advice, component replacement, and best practices for service personnel.
Ensuring electrical safety through distance checks and leakage current measurements.
Indications on circuit boards and procedures for handling FFC connectors.
Detailed methods for removing and installing flat pack integrated circuits.
Ensuring proper grounding for human body and workbench to prevent ESD.
Step-by-step guide for disassembling the unit, including part methods.
Procedure for tray removal and guidelines for reading schematic diagrams.
Setting up the PC, tools, and connections for OPU DATA write.
Verifying COM port and installing OPUDataWriter application.
Steps for performing the OPU DATA write operation using the software.
Format and display conventions for DLNA error codes.
Overview of the system's main control units and their interconnections.
Block diagrams for digital signal processing stages 1 and 2.
Diagrams for video/audio signal paths and the power supply section.
General guidelines for reading and interpreting schematic diagrams, including cautions and symbols.
Overview of schematic diagrams for various system sections like Power, Video, Audio, and Interfaces.
Comprehensive schematics for the BD Main CBA, covering various ICs and interfaces.
Exploded and packing view mechanical parts lists.
Detailed lists of electrical components for all CBA boards.
