Onkyo BD-SP809

1-8-6 E5WF0_(3D)_AIR
5. Saving The Pre-Operation OPU DATA
OPU DATA before performing the OPU DATA write is saved in a folder automatically.
5-1. When the OPU DATA write operation has been completed successfully, a folder named [FactoryInfo] is
created in the application folder (OpuDataWriter).
5-2. In the [FactoryInfo] folder, a folder is created monthly in which text file data are saved.
This text file is created with a file name of the OPU serial number and contains the pre-operation OPU DATA.
5-3. The text file is necessary for analyzing the defective BD Mechanism. Submit this text file with the defective
BD Mechanism as necessary to the appropriate managing Department.
2042 LdParamClear ERROR0 Cannot initialize LD Parameter.
2043 LdParamClear ERROR1 Cannot initialize LD Parameter.
2044 LdParamClear TIME OUT Cannot initialize LD Parameter (TimeOut).
2051 IopSet NG Iop Set Error
2052 IopSet ERROR0 Iop Set Error
2053 IopSet ERROR1 Iop Set Error
2054 IopSet TIME OUT lop Set Error (TimeOut)
2055 IopSet ERROR0 Iop Set Error
2056 IopSet ERROR1 Iop Set Error
2057 IopSet TIME OUT lop Set Error (TimeOut)
2058 CD Iop LIMIT NG CD Iop exceeds limit value.
2059 DVD Iop LIMIT NG DVD Iop exceeds limit value.
2060 BD Iop LIMIT NG BD Iop exceeds limit value.
2081 LdParamVerify NG LD Parameter Verify Error
2091 AtapiComCheck NG BE start Error.
2101 ID4 OFF NG Cannot set ID4 OFF.
2111 SET BOR RATE NG Failed to change Serial Connection Rate.
2200 Genaration NG Generation detect failure.
6001 Factory Info save Error Failed to create FactoryInfo file.
6002 Factory Info save Error Failed to create FactoryInfo file.
6100 Factory Info save Error Failed to create FactoryInfo file.
Error Code Error Description
Year(2010)Month(12)
Pre-operation OPU DATA text file