Onkyo C-733

10
Turning On the C-733
To turn on the Onkyo Separate Collections
If you’re using the C-733 together with the A-933 ampli-
fier from the Onkyo Separate Collection, press the
remote controller’s [ON] button once to turn on the
A-933, and press it again to turn on the C-733.
Playing CDs
Turning On the C-733
1
Plug the power cord into a suit-
able wall outlet.
2
Press the C-733’s [STANDBY/ON]
button.
The C-733 turns on, and the
STANDBY indicator goes off.
To turn off the C-733, press the
[STANDBY/ON] button. The C-733
will enter Standby mode.
The C-733 is not completely shutdown
in Standby mode.
STANDBY/ON
STANDBY
DISPLAY
STANDBY/ON
STANDBY/ON
TAPE
/
CDR
PRESET
VOLUME
CD
MD
PRESET
ON
STANDBY
FM AM CLEAR
78
9
10/0
>
10
4
56
231
GROUP
MUTING
ON
RC-613S (remote controller
supplied with the A-933)
Playing CDs
1
To open the disc tray, press the
Open/Close [ ] button.
2
Put the CD on the
tray with the
label-side facing
up.
Be sure to put 8-cm
discs in the center of
the tray.
3
To close the tray, press the Open/
Close [ ] button again.
4
Press the Play [ ] button to
start playback.
Playback starts and the Play indi-
cator appears on the display.
Note:
With CDs that contain many tracks,
playback may take a while to start.
STANDBY/ON
STANDBY
DISPLAY
Label side
*EnC73302.fm Page 10 Monday, February 21, 2005 12:32 PM