En-
21
Basic Operation
—Continued
To mute the CBX-300, press the remote
controller’s [MUTING] button. “Muting”
appears on the display for a few seconds.
The MUTING indicator flashes continu-
ously while the CBX-300 is muted.
To unmute the CBX-300, press the [MUTING] button
again.
Tips:
While the CBX-300 is muted:
• Press the VOLUME [
/
] buttons on the CBX-300
or pressing the VOLUME [ ]/[ ] buttons on the
remote controller will unmute the CBX-300.
• If you turn the CBX-300 off, the next time you turn it
on, the CBX-300 will be unmuted.
With the CBX-300’s three preset equalizer
settings, you can change the tone of the
sound.
To select a preset equalizer setting, press the
remote controller’s [PRESET EQ] button
repeatedly. The preset equalizer settings are
selected in the following order.
You can adjust the brightness of the
CBX-300’s display. Press the remote con-
troller’s [DIMMER] button repeatedly to
select the following options:
Muting the CBX-300
Preset EQ
MUTING
DIMMER
PRESET EQ
MUTING indicator only flashes continuously
VOCALSTANDARD DYNAMIC
CLEAR
Changing the Display Brightness
Normal Dim
CBX-300EnFrEs.book Page 21 Friday, September 14, 2007 9:26 AM
To Next Page
Loading...
