Onkyo CR-185X

12
1
2
3
TUNER TAPE
M D
C D
REMOTE CONTROLLER
RC-332S
SLEEP
PRESET
AMFMLINE
CLOCK
CALL
SCROLLREPEAT
CLEAR
PLAY
MODE
RANDOM
123
DIRECT
S.BASS
MUTING
TONE
TIMER
UP/DOWN
ENTER
123
456
789
10 / 0
REPEAT
CLEARMEMORY
DISC
MODE
C D / M D / PRESET / TIMER
REC
DISC
VOLUME
– – – – –
/
CLOCK/CALL
1
Setting the clock
The following example shows how to set the
clock to “9:38” on Friday.
1. Press the TIMER button repeatedly
until “ADJUST” is displayed, then
press the ENTER button.
2. Press the π or † button to set the
current day of the week, then press the
ENTER button.
• Enter the current day of the week directly
by pressing the following number buttons
on the remote control.
1: Sunday 2: Monday
3: Tuesday 4: Wednesday
5: Thursday 6: Friday
7: Saturday
3. Enter the current time directly by press-
ing the number buttons on the remote
control, then press the ENTER button.
For example:
To set the clock to “9:38”, press the 10/0,
9, 3, 8 buttons, then the ENTER button.
To set the clock to “11:00”, press the 1, 1,
10/0, 10/0 buttons, then the ENTER but-
ton.
• The time can be set by pressing the π and
† buttons to change the minutes.
• You can set the time accurately from the
TV or radio news.
Note:
• To find out the time while a unit of the
equipment is playing, press the CLOCK
CALL button on the remote control. Af-
ter the day and time are displayed for the
first three seconds, the source and time
are displayed. Press the button again to
return to the previous display.
• If there is a power failure, the clock must
be set again.
2
TIMER
ENTER
3
ENTER
123
456
789
--/--- 10/0
Setting the Time and Day
(for remote control only)
• The time display flashes when you plug the power cord into an AC outlet. The time will flash until you set the clock.
• The clock is displayed in 24 hours.
ENTER
UP/DOWN