Onkyo CR-185X - Using the Timer; Selecting Timer Modes; Setting Timer Operation On;Off

24
1
1
Selecting the timer mode
1. Press the TIMER button to switch the
timer mode among the following five
modes:
WEEKDAY: You can play from your
selected component (CD, tape, tuner, MD,
line) at the designated time on weekdays.
WEEKEND: You can play from your
selected component (CD, tape, tuner, MD,
line) at the designated time on weekends.
REC: Starting at the designated time,
you can record your favourite programs
from the tuner or the component con-
nected to the LINE IN connectors. The
tape deck, the MD recorder or both the
tape deck and the MD recorder can be
selected for recording.
DAYSET: You can change the day of the
weekday or weekend setting.
ADJUST: You can set the clock.
2. Press the ENTER button when the de-
sired mode is displayed.
Setting of the timer operation
1. Press the TIMER button repeatedly
until the desired timer mode is dis-
played.
2. Press the π or † button to turn the
mode on or off.
3. Press the ENTER button when the de-
sired mode is displayed.
Using the Timer
Setting the timer is simple and convenient using the remote control;
however, the main unit can be used instead.
With the unit in stand-by mode, press both the MEMORY and
DISPLAY buttons to enter timer setting mode. Then, use the
buttons shown below to perform the appropriate operations.
Remote control CR-185X main unit
TIMER
TUNER TAPE
M D
C D
REMOTE CONTROLLER
RC-332S
SLEEP
TAPE C D
PRESET
M D
AMFMLINE
CLOCK
CALL
SCROLLREPEAT
CLEAR
PLAY
MODE
RANDOM
123
DIRECT
S.BASS
MUTING
TONE
TIMER
UP/DOWN
ENTER
123
456
789
10 / 0
REPEAT
CLEARMEMORY
DISC
MODE
C D / M D / PRESET / TIMER
REC
INPUT SELECTOR
DISC
VOLUME
POWER
– – – – –
/
ENTER
π UP/DOWN †
TIMER
2
3
ENTER
UP/DOWN
TIMER
2
ENTER
TIMER
ENTER
UP/DOWN
DISPLAY
MEMORY