EasyManua.ls Logo

Onkyo CR-445

Onkyo CR-445
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Using the Timers—Continued
38
3
If you selected FM or AM, use the
[ ] / [ ] buttons to select the
radio preset, and then press
[ENTER].
4
Use the [ ] / [ ] buttons to
select Once or Every, and then press
[ENTER].
Select “Once” for one-off operation. Select
“Every” to perform the same operation
every week.
5
If you selected “Once”, use the
[ ] / [ ] buttons to select the
day, and then press [ENTER].
You can select: SUN, MON, TUE, WED,
THU, FRI, or SAT.
Skip to step 8.
6
If you selected “Every”, use the
[ ] / [ ] buttons to select the
day, “Everyday”, or “Days Set”, and
then press [ENTER]. If you selected
other than “Days Set”, skip to step 8.
You can select the followings:
7
If you selected “Days Set”, use the
[ ] / [ ] buttons to select the
first day, and then press [ENTER].
Use the [ ] / [ ] buttons again
to select the last day, and then press
[ENTER].
You can select only consecutive days.
8
Use the [ ] / [ ] buttons to
specify the On time, and then press
[ENTER].
You can also use the remote controllers
number buttons to enter the time. For
example, to enter 7:29, press [7], [2], and
[9].
Notes:
Once the On time is set, the Off time is
automatically set to one hour later.
Use the remote controllers [ > 10]
b
utton to select A.M. or P.M.
9
Use the [ ] / [ ] buttons to
specify the Off time, and then press
[ENTER].
10
Use the [ ] / [ ] buttons to
specify the CD receivers volume
level, for the timer setting, and then
press [ENTER].
To keep the latest volume level for the
timer setting, press [ ] button
repeatedly until “TimerVol.Lst” appears on
the display and set.
11
Timer indicator 1, 2, 3, or 4 will light
up.
Press the [ON/STANDBY] button to
set the CD receiver to Standby.
Notes:
Be sure to set the CD receiver to
Standby, otherwise the timed operation
will not work.
While a timed operation is in progress,
you can cancel it by pressing the
[TIMER] or [SLEEP] button.
To return to step 1 and start timer programming all
over again, press the [MENU / CLEAR] button at
any point in this procedure.
Number of
programmed timer
Timer
SUN
TUE
MON
Days Set Everyday
WED THU
SAT
FRI

Related product manuals