12
f ETHERNET port
This is the port for connecting to network. You
can connect this to a router or a hub.
g AUDIO OUT L/R jacks
These are the analog audio output jacks.
h VIDEO OUT jack
This is the analog video output jack.
i u jack
This is the jack for linked operation with Onkyo
amp or AV receiver equipped with u jack.
Connection only by u cable cannot perform
linked operation. Appropriate connection by
analog audio cable is also required.
j OPTICAL AUDIO OUT jack
This is the optical audio output jack.
k RI MODE switch
Sets RI MODE switch to match your amp or AV
receiver’s input display (see below).
TAPE
TAPE DOCK
DOCK
Amp or AV receiver’s
input display
RI MODE switch
See your amp or AV receiver’s instruction manual
for details on changing the input display.
To control your
iPod/iPhone/iPad with
your amp or AV
receiver’s remote
controller, select the
matching remote
control mode.
Amp or AV receiver’s
remote control mode
To Next Page
Loading...
