Onkyo DV-S555

DV-S555
2. Setting the Region code.
* MDD1N and MJJ2N are automatically chosen. (Automatically witting)
2-1 Turn on the power switch and standby switch is turned on.
Destination RC-449DV (Slide SW: TV position) Transmission Code Region
MDD1N * * 1
MJJ2N * * 2
MUP2P 2 D22F 12 2
MUT3P 3 D22F 13 3
MUS4P 4 D22F 14 4
MUR6R 6 D22F 16
6
Flexible flat cable Part No. GGD1231
Upgrade jig Part No. GGF1348
RS-232C cable (D-Sub 9pin to
D-Sub 25pin)
male
female
UPGRADE JIG
2-2 Select a regional code. (Using the remote controller RC-449DV Part number 24140449)
3. Confirm the program
3-1 Press the [SETUP] key.
3-2 Select the "Setup Menu Mode", in the "General" menu". And select "BASIC".
3-3 Push the [DISPLAY] Button. The Region and FW Version information will appear
on the TV Display.
<MDD/MUP/MUS/MUR>
[SETUP]
Setup Navigator Start
Auto Start Off
[ENTER]
Setup Menu Mode
[DISPLAY]
EX) "Region * / Ver:1.048 / AV:6.0/0.3"
*
: automatically chosen
STOPPAUSE
FUNCTION M
DOWN UPFR FF
CLEAR
PROGRAM RANDOM REPEAT A
-
B
STEP/SLOW
SEARCH
PLAY
23
456
789
1
0
+
10
+
-
TVDVD
RC449DV Remote controller
Parts No. 24140449 (U.S.A
remote controller)
UPGRADE FIRMWARE
REMOTE CONTROLLER
RC
-
449 DV