Why does the picture from my Onkyo DV-S757 DVD Player not appear on the TV screen?
If the picture from your Onkyo DVD Player isn’t showing on the TV screen, ensure that your TV is set to the correct input for the DVD Player. Also, verify that all the connections to the DVD Player are secure and correctly set up.
How to fix no sound on Onkyo DVD Player?
If your Onkyo DVD Player isn't producing any sound, try the following: * Ensure that the [Digital Out] setting in the Audio menu is set to [On]. * If you are not using digital outputs, make sure that the [Linear PCM Out] setting is set to [Down Sample On] or connect using the analog outputs. * Verify that the correct sound signal conversion method is selected. * Check that the pause mode is not engaged by pressing £ or 8. * Increase the volume level on your TV or amplifier. * If playing a DVD or CD recorded in DTS audio, connect the digital output on the player to the digital input on a receiver or amplifier with a built-in DTS decoder.
What to do if my Onkyo DV-S757 DVD Player doesn’t switch on?
If your Onkyo DVD Player doesn’t switch on, make sure the mains lead is properly connected and the main power is turned on. If the issue persists, try switching the main power off and on again. If this doesn't work, disconnect the mains lead and reconnect it. If the AC fuse is blown, contact your nearest ONKYO service center.
Why is my Onkyo DV-S757 DVD Player remote not working?
If the buttons on your Onkyo DVD Player operate but the remote doesn't, first ensure that new batteries are properly inserted. Then, point the remote directly at the remote sensor on the DVD Player and make sure you are within 5 meters of the unit.
What to do if the disc tray keeps opening on my Onkyo DVD Player?
If the disc tray on your Onkyo DVD Player automatically comes back out shortly after closing, ensure the disc is correctly placed on the tray using the disc tray guide. If the problem persists, the disc may be dirty or warped. Also, confirm that the region number on the disc matches the number supported by the player.
Why won't my Onkyo DV-S757 DVD Player start playback?
If your Onkyo DVD Player won't start playback, first make sure a disc is inserted correctly with the playback side down, and that the disc tray is properly aligned. Verify that the disc is playable and not dirty. Also, check if the parental lock function is activated and deactivate it if necessary.
Why are some MP3 tracks missing on my Onkyo DV-S757?
If some MP3 tracks appear to be missing from a disc on your Onkyo DVD Player, ensure that the track names end in ".mp3" or ".MP3". The player recognizes only the first 250 folders and tracks on a disc. If there are more, you won't be able to play them. This player is not compatible with multi-session discs; you will only be able to play tracks recorded onto the first session.
Why is the picture unstable on my Onkyo DV-S757 DVD Player?
If the brightness is unstable or noise is visible when playing a picture on your Onkyo DVD Player, this is likely due to copy protection being activated. Connect the DVD Player directly to the TV, avoiding connections through a VCR.
How to adjust the screen aspect ratio on my Onkyo DV-S757?
If the screen appears stretched or the aspect ratio doesn't change on your Onkyo DVD Player, adjust the aspect setting in the [TV Screen] setting within the Setup screen Video 1 menu to match your TV or monitor type. If using an S-video cord, try switching the output from [S2] to [S1], as this may resolve stretching issues.
Why are some settings missing from my Onkyo DV-S757 DVD Player setup menu?
If some settings in the Setup Menu of your Onkyo DVD Player are missing, it's likely that the [Setup Menu Mode] is set to [Basic]. Change the [Setup Menu Mode] to [Expert] to access all settings.
Initial overview of the manual and getting started information.
Essential safety and operating instructions to prevent hazards and ensure proper use.
Important warnings and user compliance information for laser safety and FCC regulations.
Guidance on disc handling, power sources, player placement, and care.
Details on playable discs, compatibility, and proper disc handling procedures.
Information on MP3 file compatibility and copyright restrictions.
Details of the DVD player's specifications and included accessories for setup and operation.
Instructions for inserting batteries and basic usage guidelines for the remote control.
Identification and brief explanation of the DVD player's front panel buttons and indicators.
Explanation of various indicators on the player's display panel.
Overview of all input and output jacks located on the rear panel of the DVD player.
Detailed explanation of each button on the remote controller and their functions.
Step-by-step guide for connecting the DVD player to a TV using composite video and stereo audio cables.
Instructions for connecting via component or S-Video for enhanced picture quality.
Guide for connecting audio outputs (analog/digital) for multi-channel sound.
Steps to connect power and turn on the DVD player for the first time.
How to configure the player's TV system setting for optimal picture output.
A guided process for configuring player settings like audio, video, and language automatically.
Configuring display language and TV aspect ratio.
Configuring analog audio output connections based on amplifier setup.
Configuring digital audio formats and 96 kHz signal compatibility.
Explanation of various surround sound technologies like Dolby Digital, DTS, and MPEG2.
Basic steps for loading and playing various disc types on the DVD player.
How to interact with menu screens for navigation and content selection.
How to skip between chapters/tracks and scan disc content.
How to save playback position and turn off the player.
How to pause playback, view frames, and play content at slow speeds.
Methods to locate specific titles, chapters, tracks, or time points on various disc types.
How to browse and select MP3 tracks using the on-screen navigator.
How to repeat entire discs, titles, chapters, tracks, or specific segments.
How to play back disc content in a randomized sequence.
How to create custom playback orders for DVD titles and chapters.
How to build custom playlists for MP3 tracks.
How to create custom playback orders for Video CDs and audio CDs.
How to add, confirm, save, or erase programmed playback sequences.
How to choose different camera angles when viewing DVDs with this feature.
How to select desired audio tracks, types, and subtitle languages.
How to save the playback position and resume later, even after removing the disc.
How to store and automatically recall personalized settings for frequently watched DVDs.
How to disable video output for enhanced audio quality.
How to connect headphones and adjust the listening volume.
How to display real-time information about the current disc playback.
Adjusting display brightness and viewing disc info when stopped.
General procedure for accessing and changing player settings via the setup screen menus.
Initial setup guidance, indicator color meanings, and expert menu access.
Adjusting audio dynamic range and configuring Dolby Digital output.
Configuring DTS, MPEG, PCM outputs, and master digital output.
Setting audio output mode and configuring surround speaker parameters.
Adjusting channel gain levels and enabling CD Digital Direct mode.
Matching player output to TV screen size (4:3, 16:9) for correct image display.
Selecting S-Video output and managing the screen saver function.
Choosing from optimized video quality presets for different display types.
Creating and saving personalized video quality adjustments for specific preferences.
Customizing background, paused image, display position, and angle indicator.
Configuring display language and default audio playback language.
Setting default subtitles, menu language, and auto language features.
Options to turn subtitles on/off, display assist subtitles, or force subtitles.
A reference list of language codes for audio and subtitle selection.
Procedures for setting and confirming a password for parental controls.
Adjusting parental lock levels and configuring the player's region code.
Reference list of country codes and settings for auto disc menu and group playback.
Managing player settings via function memory and resetting to factory defaults.
A guide to diagnose and resolve common problems with the DVD player.
Solutions for problems related to the remote controller and MP3 playback.
Detailed technical data including power, dimensions, audio/video outputs, and frequencies.
Contact information for ONKYO Corporation and its regional offices.
General| Type | DVD Player |
|---|---|
| Disc Capacity | 1 |
| Video Output | Composite, S-Video, Component |
| Video DAC | 10-bit / 27MHz |
| Audio DAC | 24-bit / 192kHz |
| Progressive Scan | Yes |
| Signal-to-Noise Ratio | 115 dB |
| Remote Control | Yes |
| Disc Formats Supported | CD, CD-R, CD-RW |
| Playback Formats | MP3 |
| Audio Output | Stereo, Optical, Coaxial |
| Output Resolution | 480p |
To Next Page
