38
Turning Off the Video Signal Output
The DVD Player can be set playing audio exclusively. In
this case, you can obtain sound of better quality, as the
DVD Player does not process video signals. (All the
video output jacks send no video signals.)
Notes
• Some discs cannot be played without some on-screen menu
interaction. If this is the case, be sure to perform the on-screen
procedures as indicated before turning off the video signal
processing circuitry.
• The VIDEO CIRCUIT OFF setting is canceled whenever the DVD
Player is turned off.
Switching the video signal off
Press VIDEO CIRCUIT OFF on the
DVD Player repeatedly.
The VIDEO CIRCUIT OFF indicator lights
up.
To turn on the video circuitry, press the
button again.
DVD
VCD
CD
MP3
VIDEO CIRCUIT OFF
To Next Page
Loading...
