To Next PageTo Next PageWhat to do if the picture from my Onkyo DV-SP500 DVD Player doesn’t appear on the TV screen?
If the picture from your Onkyo DVD Player isn’t showing on the TV screen, ensure the TV is set to the correct input for the DVD Player. Also, double-check all the connections to the DVD Player to make sure they are secure.
Why is there no sound coming from my Onkyo DVD Player?
If your Onkyo DVD Player isn't producing any sound, there could be several reasons: * If you are using the digital output, check that the [Digital Out] setting is set to [On]. * Ensure that the volume level of your TV or amplifier is turned up and not set to the minimum. * If the DVD or CD is recorded in DTS audio, connect the digital output on the player to the digital input on a receiver or amplifier with a built-in DTS decoder. * If the Setup screen Audio menu [96 kHz PCM Out] setting is set to [96 kHz], either connect using the analog outputs, or set [96kHz PCM Out] in the Audio menu to [96kHz 3 48 kHz]. * Make sure that the pause mode is not engaged by pressing 3 or 8 to exit the pause mode. * Verify that you've selected the correct sound signal conversion method.
What to do if my Onkyo DV-SP500 does not start playback?
If your Onkyo DVD Player isn't starting playback, here are a few things to check: * Make sure a playable disc is properly inserted with the playback side down, and that “DVD,” “VCD,” or “CD” is lit in the DVD Player’s display. * Ensure the disc is placed within the proper guide on the disc tray. * If the disc is dirty, eject it and clean it. * If the parental lock function is activated, deactivate it or change the parental lock level.
Why do the buttons on my Onkyo DV-SP500 DVD Player operate but the buttons on the remote controller do not operate?
If the buttons on your Onkyo DVD Player operate but the remote controller buttons do not, try these steps: * Ensure that you have inserted new batteries in the remote controller, replacing them if necessary. * Make sure you are pointing the remote controller at the remote sensor of the DVD Player and are within 5 meters of the unit.
How to fix an Onkyo DVD Player that doesn’t switch on?
If your Onkyo DVD player doesn't switch on, make sure the mains lead is properly connected and the main power is turned on. If it still doesn't work, try switching the main power off and on again. If that doesn't help, disconnect the mains lead and then reconnect it.
What to do if the disc tray comes back out automatically on my Onkyo DV-SP500 DVD Player?
If the disc tray of your Onkyo DVD Player comes back out automatically, make sure the disc is placed properly on the disc tray using the disc tray guide. The disc might also be dirty or warped. Also, if the region number on the disc does not match the number on the player, the disc cannot be used.
Why is the screen stretched or aspect does not change on my Onkyo DV-SP500 DVD Player?
If the screen appears stretched or the aspect ratio doesn't change on your Onkyo DVD Player, adjust the aspect setting in the [TV Screen] setting in the Setup screen Video 1 menu to the screen type most appropriate to your TV or monitor. If you're using an S-Video cord, switching the output from [S2] to [S1] might help.
Why is brightness unstable or noise visible on the playback picture of my Onkyo DV-SP500?
If the brightness is unstable or noise is visible on the playback picture of your Onkyo DVD Player, it may be due to copy protection being activated. Try connecting the DVD Player directly to the TV, avoiding connections through a VCR.
Why do some settings in the Setup Menu not appear on my Onkyo DV-SP500 DVD Player?
If some settings in the Setup Menu of your Onkyo DVD Player are not appearing, it might be because the [Setup Menu Mode] is set to [Basic]. Change the [Setup Menu Mode] to [Expert] to reveal all settings.
General| Type | DVD player |
|---|---|
| Disc Capacity | 1 |
| Progressive Scan | Yes |
| Video Output | Component, Composite, S-Video |
| Remote Control | Yes |
| Disc Types | DVD, CD, CD-R, CD-RW, DVD-R, DVD-RW |
| Playback Formats | MP3, JPEG |
| Audio D/A Converter | 24-bit/192kHz |
| Video D/A Converter | 10-bit/54MHz |
| Video DAC | 10-bit/54MHz |
| Audio DAC | 24-bit |
| Output Resolution | 480p |
| Audio Output | Coaxial, Optical |
Essential safety instructions and warnings for operating the DVD player.
General warnings and precautions for safe and proper use of the player.
Guidelines for handling, cleaning, and storing discs for optimal playback.
Details on the player's features and the included accessories in the package.
Instructions on inserting batteries and using the remote controller for the DVD player.
Identification of front panel and rear panel controls and their functions with page references.
Guides for connecting the DVD player to a TV, including component, audio/video, and S-video connections.
Instructions for connecting the DVD player to an amplifier for enhanced audio output.
Steps to connect the power cord and turn on the DVD player for the first time.
Initial setup process using the on-screen Setup Navigator for audio, video, and language settings.
Basic steps for loading a disc and starting playback of DVDs, VCDs, CDs, and MP3s.
How to skip chapters/tracks and perform fast forward/reverse scanning during playback.
How to view images in still frame, slow motion, or frame-by-frame during playback.
Methods for searching titles, chapters, tracks, or specific time points on discs.
Options for repeating entire titles, chapters, tracks, or specific segments of playback.
How to play titles, chapters, or tracks in a random order for varied listening or viewing.
Creating custom playback sequences for DVDs, CDs, and MP3s.
How to select different camera angles on DVDs that support multi-angle viewing.
Changing audio tracks and subtitle languages for a more personalized viewing experience.
Resuming playback from the last stopped point, even after removing the disc.
Storing and recalling custom settings for frequently watched DVDs.
Displaying information about the current disc, including titles, chapters, tracks, and bitstream rates.
General guide to navigating setup menus for audio and video configurations.
Configuring video output, screen saver, and display settings for optimal picture quality.
Customizing picture settings like fine focus, contrast, sharpness, and color.
Configuring OSD, audio, subtitle languages, and auto language features.
Managing parental control levels, passwords, and regional codes for disc playback.
Instructions for programming the remote to control other brands of TVs.
Solutions for common problems, symptoms, causes, and remedies for DVD player issues.
Technical details and operational parameters of the DVD player, including power, dimensions, and outputs.
