18
Playing CDs—Continued
For MP3 CDs, tracks (MP3 files) may be organized in a
hierarchically, with groups (folders) containing tracks
and subgroups, as shown below.
• In this manual, MP3 files are referred to as tracks.
• Likewise, folders (directories) are referred to as
groups.
If you don’t select a specific MP3 track or group for
playback, all of the MP3 tracks on the CD will be played
in numerical order starting with track #1 in parentheses.
For the DX-7355, there are two modes for selecting
tracks (MP3 files): Navigation mode and All Group
mode.
In Navigation mode, you can select tracks (MP3 files) by
navigating through the group (folder) hierarchy, moving
in and out of groups (folders) and subgroups (subfold-
ers).
In All Group mode, all groups (folders) appear at the
same level, making it easy to select groups (folders)
regardless of the hierarchy.
While playback is stopped, press the [ ] button to enter
the Navigation mode or the [ ] button to enter the All
Group mode.
When operating directly the DX-7355, press the Stop
[ ] button to enter the Navigation mode or hold down
the Stop [ ] button for about 2 seconds to enter the All
Group mode.
The combination between the way to press the button
and the corresponding playback mode can be
exchanged. When operating on DX-7355, the track
selection in the Navigation and All Group modes can be
disabled. (See “STOP KEY” of “Setting MP3 Prefer-
ences” on page 25.)
Selecting Tracks in Navigation Mode
In Navigation mode, you can select tracks by navigating
through the group hierarchy. This mode can only be used
while playback is stopped.
If any of random playback, memory playback, or
1-group playback mode is currently selected, press the
[PLAY MODE] button to cancel the mode before pro-
ceeding.
Selecting Tracks (MP3 Files)
Track #1
(Track #11)
Track #1
(Track #1)
Track #10
(Track #10)
Group #3
Track #2
(Track #12)
Root Group #1
Group #2
Track #3
(Track #13)
Group #4
Track #1
(Track #14)
Track #5
(Track #18)
1
While playback is stopped, press
the [ ] button.
The DX-7355 enters Navigation mode
and “ROOT” appears on the display.
2
Press the [ ] button.
The first group name in ROOT appears
on the display.
If the disc contains no groups, the first
track name is displayed.
3
Use the [ ]/[ ] buttons to select
other groups and tracks at the
same level.
• Groups that don’t contain tracks or
subgroups can’t be selected.
• Repeat steps 2 and 3 to select the
tracks and subgroups in that group.
• To move up a level, press the [ ]
button.
• To cancel the procedure at any point,
press the Stop [ ] button.
4
To start playback, press the Play
[ ] button.
Playback will start with the specified
track or group and continue until all of
the tracks on the disc have been played.
,,,
ENTER
MP3
GROUP
MP3
GROUP
To Next Page
Loading...
Need help?
General
Weight and Dimensions
