24
SLEEP SOURCE C D TIMER M D M D
CH
C D
C D
ONCE
W.DAY
W.END
REC
L
R
S.BASS
-
40
-
20
-
10
0 OVER
-
6
-
2
MUTING DIGITAL CHAIN
REPEAT
DISC TRACK ELAPSED REMAIN TIT LE
RDS MONO AUTO STEREO TUNED
1 TR MEMORY
RANDOM
LEVEL - SYNC
-
M D
DUB TOC
Dubbing a CD to an MD (CD dubbing) (continued)
3 Select a CD Dubbing mode.
4 Press CD DUBBING to start dubbing.
The FR-V77 searches for the peak level in the CD and
sets the optimum recording level. (DLA LINK)
Note:
If you change the REC MODE switch setting after
recording starts, the recorded sound will be interrupted.
Switching the display information during dubbing
• Pressing CD/MD repeatedly toggles between the CD
and MD information display.
Canceling the dubbing
operation
When playback of a CD is
complete, or an MD is recorded
up to the end, recording
automatically stops. To cancel
the operation during recording,
press MD
or CD .
Can’t dub?
• “Cannot Rec” appears on
the display.
The current MD is for playback
only. Use a recordable MD.
• “Protected” appears on the
display.
The MD is write-protected. See
“Precautions for handling the
MiniDisc (MD)” on page 55.
• “Disc Full” appears on the
display.
The MD has no space
available for recording. Use a
new MD.
• “CD Dub Fail” appears on
the display.
The MD mechanism is still
operating. Wait a while, then
press CD DUBBING.
The CD is in RANDOM mode.
Press MODE/AUTO/MONO to
cancel RANDOM mode.
CD Dub Mode?
Fade Album?
Album Mode
SLEEP SOURCE C D TIMER M D M D
CH
C D
C D
ONCE
W.DAY
W.END
REC
L
R
S.BASS
-
40
-
20
-
10
0 OVER
-
6
-
2
MUTING DIGITAL CHAIN
REPEAT
DISC TRACK ELAPSED REMAIN TIT LE
RDS MONO AUTO STEREO TUNED
1 TR MEMORY
RANDOM
LEVEL - SYNC
-
M D
DUB TOC
Track the song number being
recorded on the MD
Track the song number
being played on the CD
Track the song number being
recorded on the MD
Track the song number
being played on the CD
CD information (“CD” lights up.)
MD information (“MD” lights up.)
1 Press EDIT/CLEAR/NO repeatedly to select “CD
Dub Mode?.”
2 Press REPEAT/YES.
A message appears asking if you wish to change the
current setting.
(In this example, the “Fade → Album?” message asks you
if you wish to change from Fade out to Album dubbing.)
Album dubbing:
If the entire last song being recorded does not fit on the
MD, that song will be deleted.
Fade out dubbing:
If the entire last song being recorded does not fit on the
MD, that song fades out at the end.
3 To select Album mode, press REPEAT/YES. To
accept the current setting, press EDIT/CLEAR/NO.
“CD-MD Dubbing” scrolls on
the display.
“X2 Dubbing?” appears for
two seconds.
EDIT / CLEAR
NO
REPEAT
YES
CD DUBBING REC
MD
REPEAT
YES
To Next Page
Loading...
