Onkyo FR-V77 User Manual (English)

Questions and Answers:

L
leonandreaAug 19, 2025
What to do if there is no sound from my Onkyo FR-V77 speakers?
- J
  Jeffrey CollinsAug 19, 2025
  If no sound is coming from the left or right speaker of your Onkyo Media Player, there might be several reasons: * The speaker wire may be touching other jacks, connectors, or metal parts; check the speaker connections. * The volume level might be set too low; adjust the volume. * The sound could be muted; press MUTING on the remote control. * Headphones might be connected; disconnect them after turning down the volume. * The audio cables may not be firmly inserted; check the connections and ensure they are secure.
M
mcareyAug 21, 2025
How to fix an Onkyo FR-V77 that does not turn on?
- C
  chelseawallaceAug 21, 2025
  If your Onkyo Media Player does not turn on, the AC power cord (mains lead) may not be fully inserted into the wall outlet. Ensure the AC power cord (mains lead) plug is securely inserted into the wall outlet.
B
Brian HarrisAug 23, 2025
Why is my Onkyo Media Player remote control not working?
- J
  Jacqueline JenningsAug 25, 2025
  If the remote control for your Onkyo Media Player isn't working, it could be due to a few reasons: * The batteries might be dead; replace them with new ones. * You may be too far from the unit or outside the sensor's detection angle; check the effective range and angle of the remote control. * There might be an obstruction between the remote and the unit; try removing any obstacles or operating from a different angle.
J
John BarnesAug 26, 2025
What to do if my Onkyo Media Player won't play the disc?
- B
  Bryan MillerAug 26, 2025
  If a disc is loaded in your Onkyo Media Player but playback won't start, consider these possibilities: * The disc may be inserted upside down; ensure the label side faces upward (CD). * The disc might be extremely dirty; clean the disc (CD). * The disc could be dirty or damaged, indicated by a 'Disc Error' message (MD); replace the disc. * The inserted disc may not be recorded (MD); use a recorded disc instead. * Moisture might have formed inside the unit; remove the disc and let the unit sit for several hours to allow the moisture to evaporate.
A
Alexandra SchmidtAug 30, 2025
Why is there noise coming from my Onkyo FR-V77 Media Player?
- A
  Anthony KimAug 30, 2025
  If you are hearing noise from your Onkyo Media Player, strong magnetism from a television or similar device might be interfering with its operation. Try turning off any nearby televisions or similar devices, or move them away from the unit.
T
tbishopSep 1, 2025
Why does my Onkyo FR-V77 disc keep skipping?
- M
  melanie29Sep 1, 2025
  If the disc skips while playing on your Onkyo Media Player, it may be due to the following reasons: * Vibrations are being transmitted to the unit; place the unit in a vibration-free location. * The disc is severely scratched; replace it with a new one. * The disc is extremely dirty; clean the disc.
M
Melissa MeyersSep 4, 2025
Why is the search time so long on my Onkyo FR-V77 Media Player?
- O
  ogarnerSep 4, 2025
  If the search time is extremely long on your Onkyo Media Player, it could be because the disc is dirty or scratched. Try cleaning the disc, and if that doesn't work, replace it with a new one.
L
Lisa VegaSep 6, 2025
Why didn't the timer on my Onkyo Media Player work?
- A
  Andrea WatsonSep 6, 2025
  If the timer on your Onkyo Media Player did not operate, it could be because: * The unit was on when the start time arrived; the timer only works when the unit is off. * The timer setting overlapped with another timer; set the timer to a different time.
C
clarkmistySep 8, 2025
Why can't I store track numbers on my Onkyo Media Player?
- S
  Sarah MaxwellSep 8, 2025
  If you're unable to store track numbers when setting MEMORY playback on your Onkyo Media Player, it might be because no disc is inserted, or you are trying to input a track number that is not on the disc. Make sure a disc is inserted and that you only input track numbers that are actually on the disc.