Specifications
.Amplifier Section
Rated Output Power
North American (FTC):
(FL, FR, C, SL, SR)100 watts minimum continuous power
per
channel, 8ohmloads,
at
1 kHz,with
a maximum total harmonic distortion
ofl%
(Subwoofer) 105 watts minimum continuous power
per
channel,8 ohm loads,
at
80 Hz, with
a maximum total harmonic distortion
ofl%
(FL, FR, C, SL, SR)115 watts·minimum continuous power
per
channel,6
ohm
loads,
at
1 kHz, with
a maximum total harmonic distortion
ofl%
(Subwoofer) 125 watts minimum continuous power
per
channel, 6 ohm loads, 1 channel
driven
at
80 Hz, with a
maximum
total
harmonic distortion
of
1%
European (IEC): 6 ch X 110W at 6 ohms, I kHz,
Ich
driven
Maximum Output Power
Asian (lEITA): 6
chX
120W
at 6 ohms, I kHz, Ich driven
Dynamic Power 180 W
+ 180 W
(30,
Front)
140W
+
140W
(40,
Front)
95 W
+95 W
(80,
Front)
General
Power Supply
Power· Consumption
Stand-by Power
Consumption
Dimensions
(WXHXD)
Weight
• Video Inputs
Component
Composite
North American: AC 120
V,
60 Hz
Australian and European:
AC
230-240
V,
50 Hz
Others:
AC
1201220-240
V,
50/60 Hz
AC
220-230
V,
50/60 Hz
North American: 3.4 A
Australian and European: 360 W
Korean: 330 W
Worldwide: 300 W
North American: 0.1 W
European: 0.3 W
Others: 0.5 W
435 X 150 X 369
mm
17-l/8" X 5-7/8" X 14-l/2"
North American: 8.8 kg
19.4lbs.
Others: 9.6 kg, 21.2 Ibs.
DVD, VIDEOI,
VIDE02
DVD, VIDEOI,
VIDE02,
VIDE03
Input Sensitivity/Output
Level and Impedance I Vp-p
n50
(Component)
0.7 Vp-p
n50
(Component
PB/CB,
PRlCR)
I Vp-p
n50
(Composite)
• Video Outputs
Component MONITOR
Composite MONITOR, VIDEOI
• Audio Outputs
Analog Outputs TAPE,VIDEOI
Subwoofer Pre Outputs I
Speaker Outputs SP-A (FL, FR, C, SL, SR, SW)
+
SP-B (L, R)
Phones 1
62
THD (Total Harmonic
Distortion)
Damping Factor
Input Sensitivity and
Impedance
Output Level and
Impedance
Frequency Response
Tone Control
Signal to Noise Ratio
Speaker Impedance
Video
Section
Component Video
Frequency Response
Tuner
Section
• FM
Tuning Frequency
Range
Usable Sensitivity
Signal to Noise Ratio
THD
Frequency Response
Stereo Separation
• AM
Tuning Frequency
Range
Usable Sensitivity
Signal to Noise Ratio
THD
0.9% (Power Rated)
60 (Front, 1kHz,
80)
200 mV/ 47
ill
(LINE)
200
mV/470
0 (REC OUT)
10
Hz-50
kHz! +I dB-3 dB (Direct mode)
:1:10
dB, 80 Hz (BASS)
±1O
dB, 20 kHz (TREBLE)
100
dB
(LINE, IHF-A)
60-160
5
Hz-50
MHz
North American: 87.5 MHz-107.9 MHz
European: 87.50
MHz-I08.00
MHz
Asian: 87.50 MHz-108.DO MHz
Stereo: 22.2 dBf
(750
IHF)
Mono: 15.2 dBf
(750
IHF)
Stereo: 67 dB (IHF-A)
Mono: 73 dB (IHF-A)
Stereo: 0.5%
(I
kHz)
Mono: 0.3%
(I
kHz)
.30
Hz-15 kHz /
±I
dB
40 dB (1kHz)
North American: 530 kHz-1710 kHz
European: 522
kHz-I
61
I kHz
Asian:
522 kHz-1611 kHz at 9 kHz steps
530 kHz-171O kHz at 10 kHz steps
300
l!V
40 dB
0.7%
• Audio Inputs
Digital Inputs
Analog Inputs
Multichannel Inputs
Optical: 2
Coaxial: I
DVD (MULTICHANNEL),VIDEOI,
VIDE02,VIDE03,TAPE,CD
6
To Next Page
Loading...
Need help?
General
