Why does my Onkyo HT-S3800 power suddenly turn off?
If your Onkyo Receiver suddenly turns off, first, check the speaker wires at the rear panel to ensure no loose strands are touching each other or the panel itself. If you find any, re-attach the wires carefully, making sure no stray strands are present. Also, the Auto Power Down function may be enabled, which automatically turns off the receiver after a set time.
What to do if there is no sound from the subwoofer of Onkyo HT-S3800?
If you are not getting any sound from the subwoofer connected to your Onkyo Receiver, and the front speaker setting is set to LARGE, try changing the front speaker setting to SMALL. Alternatively, change the subwoofer setting to PLUS. This should restore the sound.
How to fix no sound from center and rear speakers on Onkyo HT-S3800 Receiver?
If you can't hear any sound from the center and rear speakers on your Onkyo Receiver, try pressing the SURR or DSP button to change the listening modes. Also, press the AUDIO SEL button to select the correct input source: H (HDMI cable), C1 (coaxial cable), O1 (optical cable), or A (analog audio cable).
Outlines initial settings like TV format, speaker setup, and input assignment.
Identifies and explains the functions of buttons and displays on the receiver's front panel.
Step-by-step guide for making bare wire connections to speaker terminals.
Warnings about hazardous voltage and proper connection techniques for speaker terminals.
Guides on connecting HDMI/DVI components and TVs, including ARC setup.
Provides instructions and safety precautions for connecting the receiver to the power outlet.
Basic steps for playing audio/video from sources and selecting audio inputs.
Instructions for playing audio files from USB devices, including compatibility notes.
Step-by-step guide for pairing Bluetooth devices with the receiver.
Steps to access and navigate the receiver's setup menu using the remote.
Guides on manually configuring speaker size, number, and placement.
Details on subwoofer settings (YES/NO/PLUS) and front/center/surround size interactions.
Sets the cutoff frequency for bass sound distribution between speakers and subwoofer.
How to adjust individual channel levels using manual or auto test tones.
How to set speaker distances to add proper delay for surround sound.
Important notes and troubleshooting for the HDMI Audio Return Channel function.
Provides solutions for common issues like no power, no sound, or no image.
Safety precautions for handling and installing speakers, including warnings about falling.
Instructions and safety warnings for wall-mounting speakers.
Procedure to reset the receiver to factory default settings.
To Next Page
General
