Do you have a question about the Onkyo HT-S5800 and is the answer not in the manual?
Channels | 7.1 |
---|---|
HDMI Version | 2.0 |
HDCP Version | 2.2 |
4K Ultra HD Pass-through | Yes |
Dolby Atmos | Yes |
DTS:X | Yes |
Bluetooth | Yes |
Total Harmonic Distortion | 0.08% |
HDMI Outputs | 1 |
HDR Support | HDR10, Dolby Vision |
Wi-Fi | Yes |
Internet Radio | Yes |
Input Sensitivity and Impedance | 200 mV/47 kOhms (Line) |
Signal-to-Noise Ratio | 106dB |
Speaker Impedance | 6 - 16 Ohms |
Explains the file naming convention for parts lists.
Details of the front panel, rear panel, and remote control unit.
Instructions for resetting the unit and its remote controller.
Protect mode and self-diagnostic procedures for abnormal conditions.
How to check model and destination via FL display.
Procedures for checking firmware version and preparing for updates.
Resolving no sound, no picture, or no power issues.
Guides for no sound, no picture, and no power troubleshooting.
Detailed check points, voltages, and signals for various PCBs.
Step-by-step disassembly of main unit components and PCBs.
Comprehensive schematics and block diagrams of all sections.
Visual guides for part identification and assembly.
Operational checks, debug modes, and service information.