79
Front Panel≫ Rear Panel≫ Remote≫
Contents
≫
Connections
≫
Playback
≫
Setup
≫
Audio Select
Select the priority for input selection when multiple audio sources are connected
to one input selector. The setting can be made for each input selector button.
Select the input selector to make the setting. Note that some of the default values
cannot be changed.
Setting Item Default Value Setting Details
Audio Select BD/DVD:
HDMI
GAME:
HDMI
CBL/SAT:
HDMI
STRM BOX:
HDMI
PC:
Analog
CD:
COAXIAL
TV:
OPTICAL
"ARC": When giving priority to the input signal from
ARC-compatible TV.
•
This item can be selected only when "5. Hardware"
- "HDMI" - "Audio Return Channel" is set to "On"
and also the "TV" input is selected.
"HDMI": When giving priority to the input signal
from HDMI IN jacks
• This item can be selected only when the input
to be set is assigned to the HDMI jack in the
"1. Input/Output Assign" - "HDMI Input" setting.
"COAXIAL": When giving priority to the input signal
from DIGITAL IN COAXIAL jacks
• This item can be selected only when the input
to be set is assigned to the COAXIAL jack in the
"1. Input/Output Assign" - "Digital Audio Input"
setting.
"OPTICAL": When giving priority to the input signal
from DIGITAL IN OPTICAL jacks
• This item can be selected only when the input
to be set is assigned to the OPTICAL jack in the
"1. Input/Output Assign" - "Digital Audio Input"
setting.
"Analog": When giving priority to the input signal
from AUDIO IN jacks
• This item can be selected only when the input
to be set is assigned to the AUDIO IN jack in the
"1. Input/Output Assign" - "Analog Audio Input"
setting.
Setting Item Default Value Setting Details
PCM Fixed Mode O Select whether to x input signals to PCM (except
multi-channel PCM) when you select "HDMI",
"COAXIAL", or "OPTICAL" in the "Audio Select"
setting. Set this item to "On" if noise is produced or
truncation occurs at the beginning of a track when
playing PCM sources. Select "O" normally.
• Each time the "Audio Select" setting is changed,
the setting is restored to "O".
• The setting cannot be changed when "TUNER" or "BLUETOOTH" input is selected.
Video Select
When "TUNER" or "BLUETOOTH" input is selected, you can set the input from
which video is displayed on the TV.
Setting Item Default Value Setting Details
Video Select Last "Last": Select the video input played last.
"BD/DVD", "GAME", "CBL/SAT", "STRM BOX",
"PC", "CD", "TV": Play the video of each input.
• This setting is eective for an input selector
assigned in "1. Input/Output Assign" - "HDMI
Input".
• If the OSD language is set to Chinese, you can select this setting only when "TUNER" is
selected as input.
To Next Page
Loading...
Need help?
General
