EasyManuals Logo

Onkyo HT-S5910 User Manual

Onkyo HT-S5910
111 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #93 background imageLoading...
Page #93 background image
93
Front Panel Rear Panel Remote
Contents
Connections
Playback
Setup
Audio
Music Optimizer: Improve the quality of the compressed audio. Playback sound
of lossy compressed les such as MP3 will be improved. The setting can be set
for each input. This works in signals whose sampling frequencies are 48 kHz or
less. The setting is not effective in the bitstream signals.
It cannot be set if the listening mode is Direct.
Late Night: Enable small sounds to be easily heard in detail. It is useful when
you need to reduce the volume while watching a movie late night. You can enjoy
the effect only when playing the Dolby series and DTS series input signals.
This function cannot be used in the following cases.
When playing Dolby Digital Plus or Dolby TrueHD with "Loudness
Management" set to "Off"
When the input signal is DTS:X, and "Dialog Control" is not 0 dB
If you set the unit to the standby mode, the adjustments you made will be
restored to the previous statuses.
AccuEQ
AccuEQ: Enable or disable the equalizer function that corrects for sound
distortion caused by the acoustic environment of the room. To enable this setting,
normally select "On (All Ch)", and to disable only the front speakers, select
"On (ex. L/R)". The setting can be set for each input.
Cinema Filter: Adjusts the soundtrack with the enhanced high range so that it
suits a home theater.
In this function, the following listening modes can be used: Dolby Audio - DD,
Dolby Audio - DD+, Dolby Audio - Surr, Dolby Audio - TrueHD, Multichannel,
DTS, DTS-ES, DTS 96/24, DTS-HD High Resolution, DTS-HD Master Audio,
DTS Neural:X, DTS Express and DSD.
It cannot be set if the listening mode is Direct.
Level
Front: Adjust the speaker level of the front speaker while listening to the sound.
Center: Adjust the speaker level of the center speaker while listening to the
sound.
Subwoofer: Adjust the speaker level of the subwoofer while listening to the
sound.
If you set the unit to the standby mode, the adjustments you made will be
restored to the previous statuses.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Onkyo HT-S5910 and is the answer not in the manual?

Onkyo HT-S5910 Specifications

General IconGeneral
Receiver typeSurround
Frequency range10 - 100000 Hz
Input sensitivity200 mV
4Ω speaker supportNo
Audio output channels5.1.2 channels
Total Harmonic Distortion (THD)0.08 %
Dynamic power per channel (3 Ohm)160 W
Power output per channel (20-20KHz@8 Ohm)115 W
DisplayLCD
Product colorBlack
Audio decodersDolby Atmos
Damping factor60
Amplifier output power925 W
HDMI in4
Composite video in3
Digital audio coaxial in1
Digital audio optical in2
Ethernet LAN (RJ-45) ports0
Audio (L/R) out7
Connectivity technologyWired
Speakers connectivity typeClamp terminals
Supported radio bandsAM, FM
AC input voltage120 V
AC input frequency60 Hz
Weight and Dimensions IconWeight and Dimensions
Depth328 mm
Width453 mm
Height160 mm
Weight7800 g

Related product manuals