41
Using the Listening Modes—Continued
The following table lists all the listening modes and shows which modes can be selected for each input signal format.
: Not available when the Surr Back parameter is set to None.
Input signal format
Analog,
PCM
*1
*1. In the Direct listening modes, PCM signals at 32 kHz, 44.1 kHz, and 48 kHz are processed at 64 kHz, 88.2 kHz, and
96 kHz respectively. 96 kHz signals are processed at 48 kHz for all listening modes other than Direct, and Stereo.
Dolby D
DTS/DTS 96/24
*2
*2. DTS 96/24 is always processed as DTS.
Multich
*/2
2/0
(Stereo)
1/0,1+1 Other 3/2.1
2/0
(Stereo)
DTS-ES
Discrete Matrix
Source
Listening mode
CD, TV, VHS,
MD,
turntable,
radio,
cassette,
DTV, etc.
DVD, DTV, etc. DVD, CD, etc. DVD
Direct
✔ ✔✔✔✔✔✔ ✔ ✔
Stereo
Mono
✔ ✔✔✔✔✔✔ ✔
Multich
✔
PLIIx Movie/Music/Game
*3
Neo:6 Cinema
Neo:6 Music
*4
*3. If the Surr Back parameter is set to “None,” PLII is used.
*4. Available only when Surround speakers are connected.
✔✔ ✔
Dolby
Dolby D
✔✔
Dolby D EX
Dolby D+PLIIx Music
✔
DTS
DTS
✔
✔
*5
*5. If the Surr Back setting is set to “None,” DTS is used.
DTS-ES Discrete
✔
DTS-ES Matrix
✔
DTS+Neo:6
DTS+Dolby EX
DTS+PLIIx Music
✔
Onkyo
Original
DSP
Mono Movie
Orchestra
Unplugged
Studio-Mix
TV Logic
All Ch Stereo
Full Mono
✔ ✔✔✔✔✔✔ ✔
*4
Tip: You can check the format of the digital input signal on page 35, “Displaying Source Information.”
To Next Page
Loading...
Need help?
General
